When there is sufficient ink in the printhead, the printer will offer you the use of black ink only when one or more of the color cartridges are out of ink, and the use of color ink only when the black cartridge is out of ink. However, your printer is designed to let you print as long as possible when your cartridges start to run out of ink. For regular usage, this printer is not designed to print using only the black cartridge when the color cartridges are out of ink.

So if you are not a frequent printer, go with the regular cartridges. Our advice is that if you print often, go with XL. They will be able to print at least double the pages of a regular cartridge.

XL (Extra Large) cartridges cost more but do provide better value in the long run. HP recommends that you use original HP ink cartridges. Cartridges are not compatible between different brands, and often not within the same brand. Wait until the carriage is idle and silent before proceeding.ĬLICK HERE FOR MORE STEPS AND INSTRUCTIONS.Make sure you purchase the right ink cartridges for your specific printer. The carriage moves to the left side of the printer. Slip your fingers into the slot on the left side of the printer, and then pull forward to open the cartridge access door. You do not need to remove the printhead from the carriage. If the issue persists, continue to the next solution.įollow these steps to reseat the printhead. If these steps resolved the issue, you do not need to continue troubleshooting. Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

The printer lights might flash, and the carriage might move. The printer might go through a warm-up period. Turn on the printer, if it does not automatically turn on. Reconnect the power cord to the rear of the printer. HP recommends connecting the printer power cord directly to the wall outlet. Plug the power cord back into the wall outlet. Unplug the power cord from the wall outlet. With the printer turned on, disconnect the power cord from the rear of the printer. Wait until the printer is idle and silent before you continue. Turn the printer on, if it is not already on. While you respond to that, here's what you need to do:įollow these steps to reset the printing mechanism. No worries, as I'll be glad to help you, that said, I'll need a few more details to dissect your concern & provide an accurate solution: Business PCs, Workstations and Point of Sale SystemsĪs I understand your HP Officejet Pro 8610 has the error - 'missing or Failed Printhead',.Printer Wireless, Networking & Internet.DesignJet, Large Format Printers & Digital Press.Printing Errors or Lights & Stuck Print Jobs.Notebook Hardware and Upgrade Questions.

Hp officejet pro 8610 change ink